Programming
171
Select "Language on card" and confirm your selection by pressing
the multifunction selector.
The display changes to the following:
If a language was already in the selected position in the controls, the
security question will appear.
Press the "Save" button to overwrite the existing data.
Useful tip: When the button is pressed, or if after 30seconds no
button has been pressed, overwriting is not carried out and the
display returns to the previous menu.
Dispensing
All dispensing data for available programmes in the controls can be
copied onto a card using this option.
However, existing dispensing data will only be overwritten following
additional confirmation. For each programme, dispensing method,
dispensing phase1,2 (dispenser pump, dispensing amount and
level) and dispensing stop1,2 (yes or no) are listed. When the
dispensed agent is changed, a fast and simple dispensing
adjustment is therefore possible.
Only dispenser pumps that are active are listed.
Select the "Dispensing" menu option.
To Next Page
Loading...
Need help?
General
