1 Cottons hygiene
40 Pre-wash
Main wash 1150 rpm
+
11,0/11,0
90
°C
°C
kg
The ""field is highlighted in the display.
Useful tip: The function can be deselected by pressing the button
again.
Useful tip: Press the "Starch stop" button to starch the laundry.
Useful tip: If you do not want a spin cycle after the final rinse, press
the "Without spin" button.
If you do not want to make any further changes to the programme:
Press the "START" button.
The wash programme will start.
Changes before
starting the
programme
Changes can be made before the start of the programme, e.g. load,
temperature or spin speed:
Load
The load can be entered manually before the start of the programme.
1 Cottons hygiene 11,0 /11,0
Pre-wash
Main wash
40
90
+
°C
°C
kg
Select the "Load capacity" field by turning the multifunction
selector. Press the multifunction selector to confirm your selection.
Change the load capacity by turning the multifunction selector.
Press the multifunction selector to confirm the value.
Temperature
Before the programme starts, the temperature can be set in
1°increments from cold 15°C to the max. 95°C.
Select the "Temperature" (40°C for pre-wash) field by turning the
multifunction selector. Press the multifunction selector to confirm
your selection.
1 Cottons hygiene 11,0/11,0
Pre-wash
Main wash
40
90
+
°C
°C
kg
Change the temperature by turning the multifunction selector. Press
the multifunction selector to confirm the value.
To Next Page
Loading...
Need help?
General
