Miele PW 814 User Manual

Optional modules
54
Further options:
– Location: Lehrte
– Serial number: 12345678
– Model: PW811
– Load: 11 kg
– + button: Pressed
– Starch stop button: Pressed
– Spin stop button: Not activated
– Programme start: 11:30
– Programme finished: 12:05
– Total operating time: 0h35 min
– Electrical energy: 12.5kWh
– Gas energy: 0kWh
– Steam energy: 0kWh
– Total volume of water: 140l
– Max. water temperature: 95°C
– Max. drain temperature: 45°C
– Programme change:2 (after selecting and pressing the
multifunction selector only the last 3stops and 3starts are
displayed.)
– Programme fault: none (only the last 3faults are saved.)
– Area1: Pre-wash (after selecting and pressing the multifunction
selector, the area or the block can each be changed.)
– Block1: Pre-wash
– Operating time: 6min
– Water volume: 20l
– Dispensing phase1: Amountml (after selecting and pressing the
multifunction selector, the 6dispensations are displayed.)
– Max. temperature: 12°C
– Holding time: 6 min
– Dispensing phase 2: No

Miele PW 814 Specifications

General

Brand	Miele
Model	PW 814
Category	Washer
Language	English