Miele S 2121 - Parking and Storing

ParkSystem
A parking system has been designed
for conveniently parking the vacuum
cleaner during pauses.
^
Slot the floorhead into the parking
attachment at the back of the vacuum
cleaner.
If the vacuum cleaner is parked on a
sloped surface, e.g. on a ramp,
- retract all parts of the telescopic
wand completely,
- do not use the ParkSystem if your
vacuum cleaner is fitted with an
EasyLock suction tube.
Storing
^ Stand the vacuum cleaner upright
when it is not being used and during
storage.
^ Slot the floorhead downwards into the
parking attachment on the side of the
vacuum cleaner.
If your vacuum cleaner is fitted with a
telescopic wand, retract the tubes fully
for comfortable storage.
If your vacuum cleaner is fitted with an
EasyLock tube, store the unit by
^
pressing the release on the lower
tube to separate the two tubes.
^
Push the connection piece attached
to the upper tube into the lower tube.
Parking and storing
15