EasyManua.ls Logo

Miele S 2121 - Problem Solving Guide; after Sales Service; Warranty

Miele S 2121
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The vacuum cleaner switches off
automatically.
A temperature limiter switch switches
the vacuum cleaner off automatically if
it gets too hot.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause for overheating. Switch off the
vacuum cleaner using the On/Off
switch s. Switch off at the wall socket
and remove the plug.
After removing the cause, wait for
approximately 20 - 30 minutes to allow
the vacuum cleaner to cool down. It
can then be switched on again.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
your Miele Vacuum Cleaner
Specialist
or
Miele (see back cover for address
and telephone number).
Warranty
The appliance has a warranty period of
2 years.
For information on the manufacturer's
warranty specific to your country,
please contact Miele. See back cover
for contact details.
Problem solving guide / After sales service / Warranty
22

Other manuals for Miele S 2121

Related product manuals