When to change the thread
lifters
The thread lifters on the suction inlet to
the floorhead and the upholstery nozzle
can be replaced.
Check them from time to time and
replace them if the pile has worn down.
Correctly replacing the thread
lifters
^ Use a suitable tool to remove them
from the slots, starting at the sides.
^ Fit new thread lifters.
Spare parts are available from your
Miele Vacuum Cleaner Specialist, from
Miele (see back cover for contact
details) or via the internet at
www.miele-shop.com.
Maintenance and care
21
To Next Page
