Miele S 2121 - Preparing for Use

Attaching the suction hose a
^
Insert the hose connector into the
suction socket until it clicks into
position.
To remove the suction hose b
^
Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Fitting together the suction hose and
the handle
^ Insert the other end of the suction
hose into the handle until it clicks into
position.
Depending on the model, your vacuum
cleaner has one of the following tubes
(see "Description of the vacuum
cleaner").
–
EasyLock tube
–
Telescopic wand
Assembling the EasyLock tube
^
Take the suction tube with the
connection piece and push it into the
second suction tube, turn it clockwise
or anti-clockwise until it clicks into
position.
^
Slide the connection piece upwards
until it clicks into position.
Preparing for use
9