Connecting the handle to the suction
tube a
^
Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
To remove the handle b
^
Press the release button (arrow) if
you want to separate the parts and
pull the handle out of the suction tube
with a slight twist.
Adjusting the telescopic wand
One part of this telescopic wand is
packed inside the other and can be
adjusted to suit your height for
comfortable vacuum cleaning.
^ Press the telescopic wand release
button to release the tubes and
adjust to the required height.
Preparing for use
10
To Next Page
Loading...
