Overheating
A temperature limiter switches the vac
-
uum cleaner off automatically if it gets
too hot. The warning light , will then
come on to indicate that it has over
-
heated.
This can occur if, for instance, large ar
-
ticles block the suction tube or when
the dustbag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. In this case,
please switch off the vacuum cleaner
using the On-Off switch.
After removing the cause, wait for a pe-
riod of approx. 20 - 30 minutes, so that
the vacuum cleaner can cool down. It
can then be switched on again.
Problem solving guide
33
To Next Page
Loading...
