To switch on Delay start
The start of a programme can be
delayed by up to 24 hours (24^).
After selecting a programme:
^
Press the
Delay start
button
repeatedly until the time you require
appears in the display in h mins.
–
The
Delay start
indicator light will
flash.
–
Times of:
up to 10^ are selected in 30 minute
steps
more than 10^ in 1hour steps
– If you keep the
Delay start
button
pressed in, the time will continue to
increase up to 24^.
To begin Delay start
^ Press the
Start/Stop
button.
– The Delay start time will begin to
count down and the
Delay start
indicator light will come on.
The display shows times of:
–
more than 10^ counting down by the
hour
–
less than 10^ counting down in
minutes
The drum will turn briefly after 1 hour to
help prevent creasing.
Laundry can be added at any time
during the delay period. To do this, first
switch the dryer off and open the door.
Then: Close the door and switch the
dryer back on again.
To alter Delay start
^
Press the
Start/Stop
button.
The Delay start time will be interrupted.
^
Press the
Delay start
button
repeatedly until the time you require
appears in the display in h mins.
^
Press the
Start/Stop
button.
The Delay start time will start counting
down from the beginning again.
To cancel Delay start
^
Press the
Delay start
button when
24^ is showing in the display.
If the Delay start time has already
begun to count down:
^ Press the
Start/Stop
button.
^ Press the
Delay start
button until 24^
appears.
^ Press the
Delay start
button when
24^ is showing in the display.
Delay start
18