Program end
At the end of drying the "~ t Anti-
crease / End" indicator lights up and the
buzzer sounds (if selected).
^
Turn the program selector to "t End".
^
Open the drum door.
^
Remove the laundry.
If the dryer will not be used for
awhile:
^
Press the "s On/Off" button to turn off the
machine.
^
Turn off power at the site power main.
^
Clean the lint filter.
Note
If the "l Check lint filter" light comes on, the
lint filter needs to be cleaned. Clean the filter
as soon as the program has finished. See,
"Cleaning and Care" for details.
The laundry must not be removed from the
dryer before the drying program has fin
-
ished, ie, the cooling down phase must be
completed.
If hot laundry items are stacked or packed
they could auto-combust.
If the laundry is rinsed with hot water in the
final rinse, the residual heat in the laundry,
together with the reduced residual moisture
content, will lead to shorter processing times
and save energy.
Operation
13
To Next Page
Loading...
Need help?
General
