Cleaning and care
28
Cleaning the cover for the fine filter
Use a damp cloth to remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
Check whether the cooling fins are
blocked with fluff (as follows).
Cleaning the heat exchanger
Danger of injury. Do not touch
the cooling fins. You could cut
yourself.
Prevent damage. Carefully pass
the vacuum cleaner brush over the
surface, without applying any
pressure. Otherwise the cooling fins
or the struts in front of them could
become damaged.
Visible soiling:
Remove any visible soiling carefully
with a vacuum cleaner using a
dusting brush or a narrow crevice
nozzle.
To Next Page
Loading...
