Miele T 8164 WP User Manual

Installation and connection
38
Rear view
a
Protruding lid for holding when
moving the dryer (see arrows)
b
Mains connection cable
Transporting the dryer
To manoeuvre the dryer out of its
packing case to its installation site,
– hold it by the front feet
– as well as by the edge of the lid
where it protrudes to the rear of the
dryer.
 Only transport the dryer as
shown in the following illustrations.
 If transporting the dryer at an
angle, only tip towards the left side.
 If the tumble dryer has not been
transported as described, then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply. Otherwise the heat
pump can be damaged.

Miele T 8164 WP Specifications

General

Type	Heat Pump Dryer
Capacity	7 kg
Energy Efficiency Class	A++
Appliance Placement	Freestanding
Loading Type	Front Loading
Anti-Crease Function	Yes
Color	White
Drying Programs	Cottons, Delicates, Woollens