Settings
47
Anti-crease
Helps prevent creasing, if laundry is
not normally removed immediately
after the end of a programme. The
drum rotates at intervals for 2 hours
after the end of a programme.
The anti-crease function
– is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
– can be used for all programmes,
except Woollens handcare.
– should always be switched on.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press Start and keep it pressed in
whilst carrying out steps -.
Switch the dryer on.
Wait until the indicator light for the
Start button comes on . . .
. . . and then release the Start
button.
Turn the programme selector to
Cottons Normal.
The Empty container indicator light will
flash three times.
The option selected will be displayed
by a number which will alternate with
.
Anti-crease action off
Anti-crease 1 h
(The Clean out airways will also flash
once)
Anti-crease 2 h
(The Clean out airways will also flash
twice)
Pressing the Start button switches
between the options.
Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking.
To Next Page
Loading...
Need help?
General
