Control panel
a Start/Stop button
For starting the programme selected
and cancelling a programme once it
has started.
The indicator light flashes while a
programme is being selected and
then is on constantly when the
programme has started.
b Extras buttons
Various extra options can be added
to the drying programmes.
c Display
See the following pages for more
information.
d Delay start button
For selecting delay start.
e Drying level button
For selecting the drying level.
f Duration button
For selecting the duration for the
Cool air and Warm air
programmes.
g PC / Optical interface
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
h Programme selector
The indicator light shows which
programme has been selected.
iI-On/0-Off button
To switch the machine on or off or to
interrupt a programme.
j Door button
Pressing this button will open the
door even when the machine is
switched off at the mains.
Operating the tumble dryer
10
To Next Page
Loading...
Need help?
General
