Lock code
A code can be used to lock the
electronics on the dryer to prevent it
being used without your knowledge.
When the code has been activated, you
have to enter a code after switching the
dryer on. Otherwise the dryer cannot
be operated.
Lock code ...
^
Press the
Start/Stop
button.
To activate the lock code
Activate
^ Press the
Start/Stop
button.
The display will now request that a lock
code is entered.
To enter the lock code
The code is 250 and cannot be altered.
O __
^
Turn the programme selector until the
first number appears in the display.
^
Confirm your selection of the number
by pressing the
Start/Stop
button.
^
Repeat the process until all three
numbers have been entered.
250
^
Press the
Start/Stop
button to confirm
the code.
The following will appear in the display:
Lock code activated
Once the machine is switched off, it
can only be used again if the code is
entered.
To use the dryer when the lock code
is activated
When the machine is switched on
again, the display will request the lock
code.
^ Enter code 250 as described above
and confirm the entry.
The dryer is now unlocked and ready
for use.
To deactivate the lock code
^
Proceed as for activating the lock
code.
Programmable functions
50
To Next Page
Loading...
Need help?
General
