Operating the tumble dryer
18
Time display
The remaining programme duration will
be displayed in hours and minutes.
With most programmes, the duration
displayed may vary or "jump". The
following factors, among others, affect
the programme duration displayed: the
quantity of the laundry, the type of
fabric and the residual moisture in the
laundry. The electronics will continually
assess the conditions and adjust the
programme duration with increasing
accuracy.
Sensors
–
After touching the sensor, a later
start time for the programme (Delay
start) can be selected. Once
selected, lights up brightly.
–
The or sensors are used for
selecting the duration of the delay
start period or the duration of the
Warm air programme.
Start/Stop sensor
Touching the Start/Stop sensor starts
the selected programme or cancels a
programme that has already been
started. The sensor flashes slowly as
soon as it is possible for a programme
to be started and then lights up
constantly after the programme has
started.
To Next Page
Loading...
Need help?
General
