Programmable functions
70
Buzzer is active
The buzzer sounds to let you know the
programme has finished. It can be
switched on or off.
The continuous tone which sounds
when there is a fault is independent of
the buzzer.
Options
= Off
= On (factory default)
Airways indicator
Fluff should be removed after drying.
When an excessive amount of fluff has
collected in the filters, the programme
is cancelled and and start
flashing.
You can decide at what level of fluff
this reminder should be given.
You will have an idea of how often this
should be done after a few drying
programmes.
Options
= off
does not appear.
= heavy
only appears when there
is a heavy build-up of fluff.
= Normal (factory default)
= delicate
appears when there is
only a small build-up of fluff.
Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control panel can be selected at
seven different levels.
It will change as soon as a different
setting is chosen.
Options
= darkest level
= Factory default
...
= brightest level
To Next Page
Loading...
