Delay start
28
Selecting
Touch the sensor.
lights up brightly.
Touch the or sensor repeatedly
until the required delayed start time
appears in the time display.
– The selection is made in 30-minute
increments from (minutes) to
(hours), and after that in one hour
increments up to .
– If you keep the or sensors
pressed, the time will continue to
increase/decrease.
– If you touch the sensor again, the
selected time is deleted.
Starting
Touch the Start/Stop sensor.
– Start/Stop and light up.
– The sensors go out.
– Delay start times of more than will
count down in hours and then in
minutes until the start of the
programme.
– The drum will turn briefly every hour
until the start of the programme to
reduce laundry creasing.
Changing
Touch the Start/Stop sensor.
You can change the time with the
sensors.
Touch the Start/Stop sensor so that
the delay start period continues.
Adding or removing laundry
You can open the door to add/
remove laundry.
– All programme settings will be saved.
– You can change the drying level, if
required.
Close the door.
Touch the Start/Stop sensor so that
the delay start period continues.
Cancelling a programme
To cancel, turn the programme
selector to .
To Next Page
Loading...
