Before using for the first time
21
Downtime after installation
Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer,
wait for at least one hour before
switching it on.
Removing the protective foil
and stickers
Remove:
– the protective foil from the door
– any stickers from the front and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Miele@home
Your tumble dryer is equipped with an
integrated Wi-Fi module.
In order to use it you need:
– a Wi-Fi network
– the Miele@mobile App
– a Miele user account. The user
account can be created via the
Miele@mobile App.
The Miele@mobile App will guide you
as you connect your tumble dryer to
your home Wi-Fi network.
Once your tumble dryer is connected to
your Wi-Fi network, you can use the
App, for example, to carry out the
following activities:
– Operate the tumble dryer remotely
– Call up information on the operating
status of your appliance
– Call up information on the
programme sequence of your tumble
dryer
Connecting your tumble dryer to your
Wi-Fi network will increase energy
consumption, even when the tumble
dryer is switched off.
Before installing the tumble dryer in
its final location, ensure the signal
strength of your Wi-Fi network is
sufficient.
Miele@mobile App
You can download the Miele@mobile
App from the Apple App Store
®
or the
Google Play Store™ free of charge (only
functional in selected countries).
To Next Page
Loading...
Need help?
General
