Cleaning and care
56
Cleaning the plinth filter
Clean the plinth filter when Clean the
plinth filter. See lights up or when
the programme duration has been
extended.
To delete the message:
Confirm with OK.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
Removing the plinth filter will cause the
right-hand guide pin in the dryer to
come out. This pin ensures that the
heat exchanger access panel can only
be closed if the plinth filter is inserted
the right way round.