Changing the programme sequence
45
Changing a programme after it
has started
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If you try to change the current
programme, Cannot be changed lights
up until the original programme is reset.
Exception: You can switch the dryer off
by turning the programme selector to
the position.
You will need to cancel the current
programme before you can select a
new one.
Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the dryer and the surroundings.
See “Warning and Safety
instructions” for further information.
Cancelling a programme
Touch the Start/Stop sensor.
Cancel programme lights up.
Confirm with the OK sensor.
Finish/Cooling down will light up in the
display, depending on the drying
duration and the drying temperature
reached.
The following appears in the display:
Programme cancelled
Open the door.
Selecting another programme
Close the door.
Turn the programme selector to a
different programme.
Touch the Start/Stop sensor.
Adding or removing laundry
Risk of burning when touching
hot laundry in the drum!
You could burn yourself.
Let the laundry cool down and
remove it carefully.
Pull open the door.
Add or remove items.
Close the door.
Touch the Start/Stop sensor.
The programme will start.
To Next Page
Loading...
Need help?
General
