3. Selecting a programme
29
Switching on the tumble dryer
The dryer is switched on by selecting a
programme, and switched off by turning
the programme selector to the
position.
Turn the programme selector to a
programme.
When a programme is selected, the
programme name and the maximum
load (weight of dry laundry) possible
for the programme will appear in the
display for a few seconds.
Selecting a programme
There are three possible ways to select
a programme:
1. Selecting standard programmes
with the programme selector
Turn the programme selector to the
required programme.
The selected programme will appear in
the display. This will then be replaced
by the standard display.
To Next Page
Loading...
Need help?
General
