3. Selecting a programme
30
2. Selecting programmes via the
“Further programmes/” setting and
the display:
Turn the programme selector.
You can select the programme you
want via the display.
Touch the sensors until the
programme you want appears in the
display.
Confirm the programme with the OK
sensor.
The selected programme will appear in
the display. This will then be replaced
by the standard display.
3. Selecting programmes via the
MobileControl programme
selector position and the
Miele@mobile App
Useful tip: In order to use
MobileControl , the dryer must be
logged on to the Wi-Fi network and
Remote control must be switched on.
Turn the programme selector.
Follow the instructions in the display.
Touch the Start/Stop sensor.
The dryer can now be operated via a
mobile device together with the
Miele@mobile App.
To Next Page
Loading...
Need help?
General
