Before using for the first time
23
Select the required connection type
from the display.
1. Connect via WPS
2. Connect via App
Before installing the tumble dryer in
its final location, ensure the signal
strength of your Wi-Fi network is
sufficient.
If the connection is successful, the
following will appear in the display:
Confirm with the OK sensor.
Continuing setup
Confirm with the OK sensor.
Refer to chapter 1. Notes on correct
laundry care
You can then select a programme
and load the tumble dryer as
described in chapters 2. Loading the
tumble dryer and 3. Selecting a
programme.
The procedure for using for the first
time is completed when a programme
lasting longer than one hour has been
carried out in full.
To Next Page
Loading...
Need help?
General
