Before using for the first time
19
Removing the protective foil
and stickers
Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not remove any labels
(e.g. the data plate), visible when you
open the door.
After installing the dryer
Before using the tumble dryer for
the first time, ensure that it is
installed and connected to the
electricity supply correctly. If it has
not been transported as described in
"Installation and connection" then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply.
When the tumble dryer is switched on
the welcome display Miele Willkommen
will appear briefly.
Setting the language
You will be asked to select the
language you want for the display. It is
possible to change the language at any
time via Settings.
You can scroll through the list by
touching the and sensors until
the language you want is highlighted
in the display.
The arrows in the display indicate
that further options are available.
Confirm your choice of language by
touching the OK sensor.
Completing the procedure for
using for the first time outlined
in these instructions
Confirm by touching the OK sensor.
Read "1. Notes on correct laundry
care" and "2. Load the tumble dryer".
You can then load the dryer and
select a programme as described in
"3. Select a programme and start it".
The procedure for using for the first
time is completed when a programme
lasting longer than one hour has been
carried out in full.
To Next Page
Loading...
