Settings menu
77
Drying levels
You can alter the drying levels for the
Cottons, Minimum iron and Automatic
plus programmes.
The setting selected is shown in a bar
chart.
Factory default: a medium setting
– Damper
The programme duration is shorter.
– Drier
The programme duration is longer.
Exception:
The Cottons programme will
remain unchanged.
Extended cool down
The automatic cooling down phase
which takes place before the end of a
programme can be extended for all
programmes with selectable drying
levels in 2 minute increments up to 18
minutes. This makes the garments
easier to handle.
Options
– 00 minutes (factory default)
– 02, 04, 06 ... 18 minutes
Airways indicator
Fluff should be removed after drying.
The Clean out airways message will
remind you to clean the filters when a
certain amount of fluff has collected in
them. You can decide at what level of
fluff this reminder should be given.
You will have an idea of how often this
should be done after a few drying
programmes.
Options
– Off
Clean out airways does not appear.
In cases of a very severe blockage in
the airways, the programme will be
cancelled and the Clean out airways
message will appear regardless of
this option.
– Heavy
Clean out airways only appears when
there is a heavy build-up of fluff.
– Normal (factory default)
– Light
Clean out airways appears when
there is only a small build-up of fluff.
To Next Page
Loading...
Need help?
General
