EasyManua.ls Logo

Miele TMG 440 WP - Appliance Switch-off and Anti-Crease Duration; Programme Memory Function

Miele TMG 440 WP
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings menu
80
Appliance switch-off
To save energy the dryer will switch
off automatically after 15 minutes. You
can lengthen or shorten the time.
The dryer will switch off after 10, 15 or
20 minutes,
if no further selection is made after
switching the dryer on
at the end of the anti-crease phase
after a programme without an anti-
crease phase has finished.
However, there is no automatic switch-
off in the event of a fault.
Options
after 10 minutes
after 15 minutes (factory default)
after 20 minutes.
Memory
The electronics will store in memory a
drying level or options for a selected
programme. The duration selected for
a timed drying programme will also be
stored in memory. These settings will
then appear the next time the
programme is chosen.
Options
Off (factory default)
On
Exception:
The Cottons programme will
remain unchanged.
Anti-crease
If you have pressed the Anti-crease
button:
the drum will continue to rotate in a
special anti-crease rhythm for a
maximum of 2 hours after the end of
the drying process. This helps prevent
creasing if laundry is not going to be
removed immediately. You can reduce
the duration of the anti-crease phase.
Options
1 hr
2 hr (factory default)

Table of Contents

Related product manuals