EasyManuals Logo

Miele TSB 143 WP User Manual

Miele TSB 143 WP
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Programme chart
33
Proofing max.2.5kg*
Use for Microfibre fabrics, skiwear, outdoor wear, fine, close-weave cotton
garments (poplin), and table linen which are suitable for drying in a
tumble dryer.
Note Items are dried to a Normal level only in this programme.
This programme includes a proofing agent fixing phase.
Only use proofing agents which are stated by the manufacturer as
being “suitable for use on membrane textiles”. These agents con-
tain fluorochemical compounds.
Do not dry items which have been treated with proofing agents
containing paraffin. Fire hazard.
Pre-ironing max.1kg*
Normal, Hand iron
Use for Cotton and linen fabric.
For minimum iron items made of cotton, mixed or synthetic fibre.
For example, cotton trousers, anoraks and shirts.
Tip This programme smoothes out creasing caused during the spin
cycle in the washing machine.
This programme is also suitable for dry fabrics.
Please remove the garments as soon as the programme has fin-
ished.
Warm air max.7kg*
Use for Multi-layered fabric whose layers have different drying character-
istics, e.g. jackets, pillows, sleeping bags and other voluminous
items.
For drying individual items, e.g. bath towels, bathing costumes
and tea towels.
Tip Do not select the longest drying time to start with. Check the items
as you are drying them to find the optimum time.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele TSB 143 WP and is the answer not in the manual?

Miele TSB 143 WP Specifications

General IconGeneral
Drum typeHoneycomb
Door colorWhite
Door hingeLeft
Door styleOpaque door
Cord length2 m
Drum volume120 L
Control typeRotary, Touch
Loading typeFront-load
Drying systemHeat pump
Built-in displayYes
Appliance placementFreestanding
Inverter technologyNo
Delay start (max)24 h
Cycle time155 min
Noise level66 dB
Drying classA
Drum capacity7 kg
Refrigerating mediumR290
Number of drying programs11
Current13 A
Heat sourceElectric
Connected load1100 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy consumption1.7 kWh
Energy efficiency scaleA+++ to D
Power consumption (off)0.3 W
Annual energy consumption208 kWh
Weight and Dimensions IconWeight and Dimensions
Depth643 mm
Width596 mm
Height850 mm
Weight58000 g
Depth with door open1077 mm

Related product manuals