EasyManua.ls Logo

Miele TSB 143 WP - Unsatisfactory Drying Results

Miele TSB 143 WP
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem solving guide
49
Unsatisfactory drying results
Problem Cause and remedy
The laundry is not suffi-
ciently dry.
The load consisted of different types of fabric.
Finish drying using the Warm air programme.
Select a more suitable programme next time.
Useful tip: You can alter the drying levels for some
programmes. See “Programmable functions”, sections
 Drying levels Cottons” and “ Drying levels
Minimum iron”.
Laundry or feather filled
pillows smell after dry-
ing
The laundry was washed with insufficient detergent
Feathers are a natural product and this is quite nor-
mal.
Laundry: use sufficient detergent next time.
Pillows: take out of the tumble dryer and air them.
Use a fragrance flacon (available as an optional
accessory) for your favourite fragrance.
Items made of synthetic
fibres are charged with
static electricity after
drying
Synthetic fibres tend to attract static charge.
Static charge can be reduced by adding a fabric
conditioner to the final rinse in the washing pro-
gramme.
There is a build-up of
fluff
Fluff is principally the result of friction when garments
are being worn and to some extent when they are be-
ing washed. Machine drying hardly causes any fluff to
form.
Fluff is collected by the fluff filters and the plinth filter
and can be removed easily.
See “Cleaning and care”.

Table of Contents

Related product manuals