Miele TSB 143 WP - Programmable Functions; Accessing and Navigating Settings

Programmable functions
72
Programming
You can use the programmable func-
tions to alter the dryer's electronics to
suit your requirements.
Programming is carried out by following
these steps (, ,  ... ) using the
sensor controls.
Accessing the programming level
Before starting
– Make sure that the programme se-
lector is turned to any of the pro-
gramme settings.
– Make sure that the door of the
tumble dryer is open.
 Touch the Start/Add laundrysensor
control and hold it down whilst carry-
ing out steps –.
 Close the tumble dryer door.
 Wait until the Start/Add laun-
drysensor control, which will now be
flashing quickly, lights up con-
stantly...
 ...and then release the Start/Add
laundrysensor control.
will light up in the time display.
Choosing and selecting a program-
mable function
The number of the programmable
function will appear in the time display
as and a number:
e.g..
 Touch the or sensor control to
scroll to the next or previous pro-
grammable function:
Programmable function
 Cottons drying levels
 Minimum iron drying levels
 Cool-down temperature
 Sensor tone
 PIN code
 Conductivity
 Control field standby status
 Memory
 Anti-crease
 Airways indicator
 Backlight brightness dimmed
 Confirm the selected programmable
function by touching the Start/Add
laundry sensor control.