Installation
43
Co
nnect the power cord. See
"Electrical connection."
Place
the exhaust ducting onto the
exhaust socket.
Unsc
rew both screws from the
installation frame again.
The canopy can now be adjusted to the
desir
ed height, observing the
permissible height ranges:
– With vented mode: upwards as far as
it will go
, downwards only to the "A"
marking.
– With recirculation mode: upwards as
far as the "U",
downwards as far as it
will go.
Follow the instructions in "Appliance
dimensions." Safety distances
between the coo
ktop and ventilation
hood must be observed.
To Next Page
Loading...
