Miele WDB004 - Running the First Programme

Before using for the first time
17
Running the first programme
 Open the stopcock.
 Turn the programme selector to Cot-
tons.
The washing machine is now switched
on and in the control panel, the temper-
ature 60°C lights up.
 Touch the Start/Stop sensor.
The programme will start and the
symbol lights up in the control panel.
After 10minutes, the indicators dim
and the Start/Stop sensor starts flash-
ing.
At the end of the programme
At the end of the programme, the Anti-
crease function is switched on. The
symbol lights up in the control panel;
: appears in the time display and
the drum occasionally rotates.
 Touch the Start/Stop sensor.
The door will unlock.
 Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
 When the programme has ended,
turn the programme selector to.
The washing machine is switched off
and is now ready for use.
Energy savings
– Ten minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– Fifteen minutes after completion of
the anti-crease phase, the washing
machine is completely switched off
and the door lock lifted.