Miele WDB004 - P14 Lock Code Functionality; P22 Control Panel Standby Status

Programmable functions
74
 Lock code
The lock code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
 = Lock code switched off (fact-
ory default setting)
 = Lock code is switched on
Using the washing machine with a
lock code
The code is 125 and cannot be altered.
 Switch on the washing machine.
   appears in the time display and
the  and  sensors light up.
 Touch the  sensor.
   appears in the time display.
 Confirm the number with the Start/
Stop sensor.
The first number was saved and you
can now enter the second number us-
ing the  and sensors.
 Also enter the second and third num-
bers and confirm the numbers with
the Start/Stop sensor.
The lock is released and a wash pro-
gramme can now be selected and star-
ted.
 Control panel standby
status
To save energy the time display and
sensors will go out after 10minutes,
and only the Start/Stop sensor will
flash slowly.
Options
 = Off
The time display and sensors
will remain lit up while the
washing machine is switched
on
 = On (factory default setting)
The time display and sensors
will switch off after 10minutes
if
– no further selection is made
after switching the machine
on
– the programme is started
However; the time display and
sensors will remain lit up for
10minutes after the end of the
programme or at the end of the
anti-crease phase.