Miele WSA 023 Active User Manual

5. Start the programme
26
Starting a programme
 Touch the sensor control.
The door will lock and the programme
will start.
If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or imme-
diately after the programme has started,
the programme duration appears on the
time display.
Switching the indicators on and off
The indicators dim automatically after
15minutes.
To reactivate the indicators:
 Turn the programme selector.
The indicators are switched on again. If
you do not reset the programme se-
lector to the previously selected pro-
gramme, the symbol will light up in
the time display.
To prevent the programme from being
cancelled, do not turn the programme
selector to the  position.
Adding laundry during a pro-
gramme sequence
Laundry can be added or removed at
any time, provided that the symbol
is not illuminated in the display.
 Touch the sensor control.
Rotating bars ...... are
shown on the time display.
If the word  appears on the time dis-
play, the door can be opened.
 Open the door. Add or remove laun-
dry.
 Close the door.
 Touch the sensor control.
The programme will continue.
Laundry cannot usually be added or re-
moved if:
– The suds temperature is above 55°C
– The water inside the drum is above a
certain level

Miele WSA 023 Active Specifications

General

Brand	Miele
Model	WSA 023 Active
Category	Washer
Language	English