Programmable functions
73
Editing and saving a program-
mable function
You can either switch a programmable
function on/off or select different op-
tions.
Touch the sensor control to
switch the programmable function
on/off or to select an option:
Programmable function
Available options
= Can be selected
= Factory default
Touch the sensor control to con-
firm your selection.
The number of the programmable func-
tion, e.g., will then light up again.
Exit programming level
Turn the programme selector to .
The option you have selected is now
stored in memory. You can change it
again at any time.
Keypad tone
Each touch of a sensor is confirmed
with an audible tone.
Options
= Keypad tone switched off
= Keypad tone switched on
(factory default setting)
To Next Page
Loading...
Need help?
General