Changing the programme sequence
38
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected option cannot be changed
once the machine has been success-
fully started. This is to prevent the oper-
ation of the machine being tampered
with (by a child, for example).
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
Turn the programme selector to the
position.
Turn the programme selector to any
position.
Rotating bars ...... are
shown on the time display.
The water is pumped away and the
door lock is then released.
Selecting a new programme
Turn the programme selector to the
required wash programme.
Check that there is still sufficient de-
tergent in the detergent drawer. Add
more detergent if necessary.
Touch the sensor control.
To Next Page
Loading...
Need help?
General