Spinning
28
Final spin speed in wash pro-
grammes
When a programme is selected, the
sensor control for the optimum spin
speed for that programme will be
brightly lit up in the control field.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Programme rpm
ECO 40-60 1400
Cottons 1400
Minimum iron 1200
Woollens 1200
Delicates 900
Express 20 1200
Dark garments/Denim 1200
Outerwear 900
Proofing 1200
Drain/Spin 1400
Separate rinse/Starch 1200
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in-
terim spin speed. If a spin speed of less
than 700 rpm is selected for the Cot-
tons programme, an additional rinse is
introduced.
Selecting Rinse hold (final spin)
Touch the sensor control re-
peatedly until the indicator (Rinse
hold) lights up.
The laundry is not spun after the final
rinse cycle and remains in the rinse wa-
ter. This helps to prevent creasing if the
laundry is not going to be removed from
the washing machine immediately after
the end of the programme.
Ending a programme with a spin
cycle
The indicator with the ideal spin speed
lights up. You can change the spin
speed with the sensor control.
Touch the sensor control.
Ending a programme without a spin
cycle
Touch the sensor control re-
peatedly until the indicator
(without spin) lights up.
Touch the sensor control.
To Next Page
Loading...
Need help?
General