Before using for the first time
18
1. Remove the transit bars
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.
2. Setting up Miele@home
There are 2 ways of connecting:
1. Via the Miele app (default)
2. Via WPS
Logging in via the Miele app
Turn the programme selector to the
MobileStart programme.
appears on the time display and
the timeout starts to count down from
10minutes. The Miele app will guide
you through the remaining steps.
When you have successfully connected,
will appear on the time display.
Logging in via WPS
Turn the programme selector to the
MobileStart programme.
Touch the sensor control until
appears on the time display and a
short keypad tone appears.
The timeout then starts to count down
from 3minutes on the time display.
When you have successfully connected,
will appear on the time display.
Tip: If the connection has not been set
up when the timeout has finished
counting down, repeat the process.
To Next Page
Loading...
Need help?
General