Miele WSD 663 Selection - Programmable Functions

Programmable functions
79
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
The programming is carried out in eight
steps (, ,  ... ) using the sensor
controls.
Accessing the programming level
Pre-requisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
 Touch the Start/Add laundry sensor
and leave your finger on it whilst car-
rying out steps -.
 Close the washing machine door.
Wait until the Start/Add laundry sensor
lights up constantly ...
 ... and then take your finger off the
Start/Add laundry sensor.
After approx. four seconds,  will light
up in the time display.
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as and a number: e.g..
 Touch the or sensor control to
scroll to the next or previous pro-
grammable function:
Programmable functions
 Keypad tone
 PIN code
 Control field switch-off behaviour
 Memory
 Additional long pre-wash – Cottons
 Gentle action
 Reduced temperature
 Maximum rinse level
 Suds cooling
 Anti-crease
 Low water pressure
 Display brightness dimmed
 TwinDos
 Dosage quantity UltraPhase 1
 Dosage quantity UltraPhase 2
 TwinDos maintenance
 Degree of soiling
 Remote control
 SmartGrid
 RemoteUpdate
 Confirm the selected programmable
function by touching theStart/Add
laundry sensor control.