EasyManua.ls Logo

Miele WSD 663 Selection - At the End of the Programme, an Indicator Light Lights up in the Control Panel

Miele WSD 663 Selection
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem solving guide
55
At the end of the programme, an indicator light lights up in the
control panel
Problem Cause and remedy
The indicator light
lights up.
Excessive foam has built up during washing.
Use less detergent next time and follow the manu-
facturer’s instructions on dosage given on the
packaging.
The indicator light
lights up and appears
on the time display.
When washing, a wash programme using a temperat-
ure above 60°C has not been run for a long time.
Run the Cottons90°C programme using Miele
machine cleaner or a multi-purpose powder deter-
gent.
This will clean the washing machine and prevent a
build-up of bacteria and odours.
and appear altern-
ately on the time dis-
play.
The Pre-ironingextra which runs at the end of the
programme could not be carried out properly.
Check whether the washing machine is aligned
correctly (see “Installation – Levelling the ma-
chine”).
Check whether the maximum drainage head
height of 1m has been exceeded.
If the fault message appears again, contact the Miele
Customer Service Department. The washing machine
can still be used, but without the Pre-ironing extra.

Table of Contents

Related product manuals