Miele WSI 863 - Operating the Washing Machine; Control Panel Overview and Functions

Operating the washing machine
14
Control panel
a
Control field
The control field consists of a dis-
play and various sensor controls.
The individual sensors are explained
in the following sections.
b
Display
The following values are shown on
the display and/or selected from it:
1. The temperature, spin speed, and
time left for the selected wash
programme.
2. The individual values for selected
extras and settings.
c
 sensors
Values shown in the display can be
changed with the  sensors. The
 sensor increases the value or
moves up the list; the  sensor de-
creases the value or moves down
the list.
d
OKsensor control
The OKsensor control is used for
confirming selected values.
e
TwinDos sensor control with the
additional Whites and Colours
sensor controls
The TwinDos sensor control is used
for deactivating and activating auto-
matic detergent dispensing. De-
pending on the colour mix of your
load, you can control the detergent
combination by selecting the Whites
or Colours sensor control.
Further information can be found in
“TwinDos”.
f
Optical interface
This is used by the Service depart-
ment as a transmission point.