Miele WSI 863 - Changing the Programme Sequence; Changing a Programme (Safety Lock); Cancelling a Programme; Interrupting a Programme

Changing the programme sequence
57
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected option cannot be changed
once the machine has been success-
fully started. This is to prevent the oper-
ation of the machine being tampered
with (by a child, for example).
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
 Turn the programme selector to the
position.
 Turn the programme selector to the
Cottons programme.
The following will appear in the display:
Cancel?
OK




Yes
 Touch theOK sensor control.
The suds are pumped away. The follow-
ing will appear in the display:
Prog. cancelled
OK





 Wait until the symbol in the display
goes out and the door unlocks.
 Pull open the door.
 Remove the laundry.
Interrupting a programme
 Turn the programme selector to the
position.
The washing machine switches off.
 To continue: turn the programme se-
lector to the position of the wash pro-
gramme that was started.
Cancel?
OK




Yes
 Touch the sensor control.
The following will appear in the display:
Cancel?
OK




No
 Confirm with the OKsensor control.
Tip: IfCannot be changed appears in
the display, the programme selector is
in the incorrect position.