Miele WSI 863 - Starting the Calibration Programme

Before using for the first time
23
5. Starting the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottonsprogramme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open  and run "Cottons" 90°C without
laundry.
 Touch the sensor control until the
OKsensor control lights up and con-
firm with OK.
1:55
OK




90°
1600
 Open the stopcock.
 Touch the Start/Add laundrysensor
control.
The calibration programme then starts.
It will take approximately 2hours.
At the end of the programme, the fol-
lowing message will appear in the dis-
play:
Set up complete
 Take hold of the door and pull it
open.
Tip: Leave the door slightly open to al-
low the drum to dry.
 Turn the programme selector to the
position.