Miele WT 2670 WPM User Manual

This washer-dryer has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
The display shows the stage the
programme has reached.
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with the
exception of the Woollens programme,
the drum continues to turn at intervals
for up to 30 minutes to help prevent
creasing. The door can be opened and
laundry removed at any time during the
anti-crease phase.
1)
Pre-rinse: A Pre-rinse without
detergent is carried out automatically
to remove dust.
2)
A third rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– Without spin has been selected
3)
A third rinse is carried out if:
Without spin has been selected
4)
In the Outerwear programme, laundry
is only spun after the main wash.
WASHING
29

Miele WT 2670 WPM Specifications

General

Door hinge	Left
Loading type	Front-load
Product color	White
Appliance placement	Freestanding
Washing capacity	5 kg
Delay start (max)	24 h
Maximum spin speed	400 RPM
Washing class	A
Water consumption per cycle	65 L
Energy consumption washing per cycle	3.4 kWh
Drum interior light	Yes

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm