Fault messages in the display
Message in the display Possible cause Remedy A
q
Drain
fault
–
The water outlet is
blocked or
restricted.
–
The drain hose has
been fixed too high.
–
Clean the drain filter and
the drain pump as
described in "Opening
the drum door in the
event of a blocked drain
outlet and/or power
failure".
–
The maximum drain
height is 1 m.
p
Inlet
fault
– The water inlet is
blocked or
restricted.
Check whether
– the stopcock is opened
wide enough.
– the inlet hose is kinked.
o
WPS
activated
The water protection
system has reacted.
Call the Service
Department.
ä
Drum lighting
fault
The drum lighting unit
is not fitted correctly.
Fit it correctly.
,
Technical fault
Call the Service
Department
There is a fault. Start the programme again.
If the fault message
appears again, contact the
Service Department.
A To switch off the fault message: Switch the machine off with the I-On/0-Off
button.
Problem solving guide
51
To Next Page
Loading...
