Miele WWD 020 - 6 End of Programme

6.End of programme
23
Opening the door and removing
the laundry
The door remains locked during the anti-
crease phase. The control field lights up
for the first 10minutes. The control field
then goes out and theStart/Add laun-
dry sensor control flashes.
 Turn the programme selector to the
position.
 appears on the timer display and
the indicator light goes out.
The door unlocks.
Tip: After the anti-crease phase, the
door will have unlocked automatically.
 Take hold of the door and pull it open.
 Remove the laundry.
Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Remove all items from the drum.
 Check the door sealing ring for any
foreign objects.
Tip: Leave the door slightly open to al-
low the drum to dry.
 If applicable, remove the used cap-
sule from the detergent drawer.
Tip: Leave the detergent drawer slightly
open to allow it to dry.