Miele WWE760 - Delay Start;Smartstart

4. Select programme settings
30
 Delay start/SmartStart
Delay start
With Delay start you can delay the
start of the programme.
This function is active when the set-
ting SmartGrid is switched off.
The hours can be set from 00 to 24.
The minutes can be set in 15 minute in-
crements from 00 to 45.
Setting the delay start time
 Touch the  sensor.
The following will appear in the display:
Start in
OK




h:0000
 Set the hours with the  sensors.
Confirm with the OK sensor.
The display will change:
Start in
OK




h0006:
 Set the minutes with the  sensors.
Confirm with the OK sensor.
Tip: The values will count upwards and
downwards automatically if you keep
your finger on the  sensor.
Altering Delay start
The selected delay start time can be
changed before the programme start.
 Touch the  sensor.
 Change the specified time and con-
firm with the OK sensor.
Cancelling delay start
The selected delay start time can be
cancelled before the programme starts.
 Touch the  sensor.
The selected delay start time will ap-
pear in the display.
 Set a time value of 0:00 h with the 
 sensors. Confirm with the OK
sensor.
The selected delay start time has been
cancelled.
After the programme has started, the
selected delay start time can only be
changed or cancelled by interrupting
the programme.