Settings
102
Controls / Display
Language
The display can be set to appear in one
of several different languages.
The flag after the word Language
(Sprache in German) acts as a guide in
case a language which is not under-
stood has been set.
The language selected is saved.
Consumption
In this setting you can check the saved
energy and water consumption values
and enter the energy cost.
Options
- Previous programme
Shows the consumption for the last
wash programme carried out.
- Total consumption
Shows the sum of the energy and the
sum of the water used by the previ-
ous programmes.
- Set the cost
You can enter the cost for energy
(electricity) and water.
Code
The code prevents the washing ma-
chine being used without your know-
ledge.
Options
- Activate
If you activate the code, you have to
enter a code after switching the
washing machine on. Otherwise it
cannot be operated.
The factory default code is 125.
- Change
If wished, you can set a different
three-digit code.
Do not forget the code you have
set.
If you forget the code, only Miele
Technical Service can unlock the
washing machine.
Make a note of your new code.
- Deactivate
The washing machine is to be oper-
ated again without entering a code.
This only appears if the code had
been activated previously.
Memory
The washing machine will save the last
settings (temperature, spin speed and
some of the Extras) selected for a pro-
gramme after the programme has star-
ted.
When the programme is chosen again,
the saved settings will appear in the dis-
play.
Memory is deactivated as standard.
Clock display
After selecting the Clock format you
can set the time of day.
Clock format
- 24 h clock (default setting)
- 12 h clock
Set
- The time of day can be set.
To Next Page
Loading...
