Miele WWR860WPS PWash2.0&TDosXL&WiFi - Programme Sequence and TwinDos Settings

Settings
104
Programme sequence
TwinDos
You can set the type of detergent and
dispensing quantities and check the
level of the UltraPhase1 and
UltraPhase2 cartridges.
Select detergent
If you wish to use your own detergent
with the TwinDos function instead of
UltraPhase1 and 2, you will need to pur-
chase the empty TwinDos containers
separately (optional accessories).
UltraPhase1 and 2 can only be dis-
pensed as a package. If a different agent
is selected, the setting for the other
compartment is automatically deleted.
The following agents can be used:
- Miele UltraPhase 1
- Miele UltraPhase 2
- Universal detergent
- Colour detergent
- Delicates detergent
- Delicates/Woollens
- Fabric conditioner
Follow the manufacturer's instruc-
tions on dosage given on the pack-
aging.
The dosage amount required for the
agent being used must be set. Follow
the instructions in the display on how to
do so.
Tip: If you select No agent the respective
TwinDos compartment will be deactiv-
ated.
Change dosage
The values set for dispensing deter-
gent from compartments  and 
can be checked and corrected.
Soiling
You can specify the default setting for
the degree of soiling.
The following soiling levels are available
to choose from:
- Light
- Normal
- Heavy
The Factory default setting is: Normal
Water plus level
There are four different water levels
which can be selected for the Water
plus Extra.
Levels
- Normal (default setting)
- Plus 
- Plus 
- Plus 